Our Systems are the most comprehensive available on the market today
Constructed using only the highest quality materials with a kit including isolating valves; the SP2000 system leaves nothing to chance.
Simple to Use
Stages
3 Stage 10" modular reverse osmosis system with a horizontally membrane mounting.
Stage1: 5 Micron sediment filtration.
Stage 2: High grade carbon filtration for membrane
Stage 3: Short-leaf" thin film composite membrane, these are US made membranes not inferior quality Asian copies
All systems come with:
1 no. 75 US gallons per day self cleaning Reverse Osmosis membrane
2 no. Filter housings
1 no. Flush Kit
1 no. Pressure Gauge
1 no. 5 micron sediment pre filter
1 no. Solid carbon block filter
1 no. Self piercing feed valve
2 metres of Green 1/4" tubing
2 metres of Blue 1/4" tubing
2 metres of Red 1/4" tubing
1 no. Handheld TDS EZ Meter
Output:
The unit will operate within 30-90psi water pressure, and at optimum above 60 psi. Lower pressures may require a pump and higher, a pressure restrictor. Output is affected by water pressure, temperature and Total Dissolved Solids, but the unit should produce 25-45 gallons per 24 hour period in average conditions. Care should be taken not to expose to system to extremes of temperature or high levels of sediment, requiring a "Heavy Sediment" kit.
Full fitting, operation, cartridge and membrane change instructions are supplied together with DIY fittings. Unit housings are guaranteed against manufacturing defect for 1 year and membranes and cartridges for their recommended period of 6 months. In the first year the membrane guarantee may be extended to 1 year if the protectant cartridges are changed within 6 months of the date of purchase. NB: Local water conditions will affect daily output and figures given are only a general guide.
Related Products: